Bedroom Projector

NX1|Bedroom Projector

Black

View Full Spec.
newegg.com

Designed for Night Experience

NX1 is a dedicated bedroom projector that will enhance your night time.
No screen is required on either the ceiling or walls, and dynamic images of up to 120 inches are vividly projected.

NX1 Exclusive Development Flexible Arm Included

Installed like a bed lamp

Ultra Small / Lightweight (83 mm × 17.2 mm × 95 mm (3 3/8 in × 11/16 in × 3 3/4 in) )(W × D × H) (excluding largest protrusion)
The flexible arm for the NX1 can be attached to a board surface up to 55 mm ( 2 1/4 in) in thickness, keeping it at a fixed angle. The included cable ties can be used to keep HDMI®/USB-C® cables neatly in place.

*The image shown is an installation image. A connection cable is required for actual use. Please refer to the instruction manual for details.

Lightweight and safe aluminum body

The simple aluminum body with efficient heat dissipation structure weighs only about 155g (5.47 oz). This is one of the design features that does not disturb a good night’s sleep, as it is light enough to minimize the risk of injury in the event of a collision when turning over in bed.

Luxurious time before bedtime

The reflected light, which is more gentle than the light from smartphones and tablets, is recommended for viewing before bedtime. Enjoy the images projected on the ceiling until just before you fall asleep.

Brightness Optimization Design

Optimum brightness for nighttime projection

105 ANSI lumens* brightness is ideal for nighttime.
Uses Texas Instruments’ (TI) DLP®IntelliBright™ to analyze image content in real time. It minimizes power consumption while improving brightness and contrast.

*ANSI lumens is a unit of measure for the brightness of lighting fixtures such as LCD projectors, as defined by the ANSI (American National Standards Institute) American National Standards Institute.
The screen is divided into 9 areas by dividing the screen into 3 sections vertically and horizontally, and the average of the brightness of each area is calculated.

2 image quality modes

Two types of image quality modes are provided: standard picture quality and dynamic picture. The user can easily switch between them by pressing and holding the power button during projection.

Automatic keystone correction

Automatically corrects vertical screen distortion up to ±40°.The image can be flipped upside down by double-clicking the power button.

*Keystone correction changes the aspect ratio of the image.

Installation distance and screen size

Depending on the projection distance, the maximum viewing size is 120 inches.

Blue light suppression

Optimized brightness reduces blue light to about 30% or less compared to smartphones and tablets.

Heat control system

The use of a uniquely designed thermal conduction device prevents device temperature rise by efficiently conducting and dissipating heat.

Quiet design

The built-in fan is designed to operate at a maximum of 25 dB* for nighttime use.

QuickStart

It takes about 5 seconds from turning on the NX1 to projection. This allows for a stress-free experience.

Power ON/OFF automatically linked with connected devices

Automatically switches to standby mode approximately 30 seconds* after operation in conjunction with the power on/off of the device currently connected to NX1.

*If there is no signal input from an HDMI device immediately after startup, it will automatically switch to standby mode approximately 3 minutes later.

Eco-friendly design
with low power consumption

Enjoy a large screen at a maximum of only 12W*, the same power consumption as a smartphone.

*Excludes power consumption for USB output.

Connection method

1-year warranty

We guarantee our products for one year after purchase.

Specifications

Model name

NMP-NX1/E (Black)

Projection type

DLP

Brightness

105 ANSI lumens

Light source

LED

Contrast ratio

400 : 1

Screen Size

30-120 inches

Aspect ratio

16 : 9

Resolution

854 × 480

Color reproducibility

Full color (16,770,000 colors))

HDMI Specification

HDMI 1.4b (HDCP1.4)

Automatic Keystone correction

Vertical ± approx. 40°

Audio output

AUDIO OUT terminal (Ф3.5 stereo mini jack)

Light Source Life

Approx. 20,000 hours

Projection distance

30 inches ( 0.86m )~120 inches( 3.45m )

Flexible Arm Installation thickness

Up to 55 mm

Dimensions

Approx. 83.0 mm × 17.2 mm × 95.0 mm (3 3/8 in × 11/16 in × 3 3/4 in) (W × D × H) (excluding largest protrusion)

Weight

Approx. 155 g (5.47 oz)

Operating temperature

0°C to 35°C (32°F to 95°F)

Input

9 VDC, 2.55 A

Power consumption

12W

*Excluding power from USB output

Output

5 VDC, 1.5 A(1port)

Drive noise

Less than 25dB

*Based on our measurement conditions

Rated Voltage, Frequency

100 to 240 VAC, 50/60 Hz

Contents

・Projector NMP-NX1 (1)
・Flexible arm (1)
・AC adapter (1)
・USB-C cable (USB 2.0 compliant, 1.0 m (3.28 ft)) (1) • High Speed HDMI® Cable with Ethernet (2.2 m (7.22 ft)) (1) • Cable clip (3) • Set of printed documentation (1)

*USB connection cable is USB 2.0 compliant.
*Binding clips are not covered by warranty.

Manual

Instruction manual[PDF]
View PDF ▸

FAQ

Q. Does it have mobile capability?

NX1 does not have a built-in battery. Please use the cable for power supply provided.

Q. Does the NX1 support wireless functionality or Wi-Fi?

No. The NX1 does not have wireless capability. It must be connected to your device via an HDMI cable.

Q. Is there a speaker function? / I can’t hear the audio.

This product does not have built-in speakers. Please use commercially available external speakers or wired earphones for external connection. Some audio formats may not play depending on the connection device or connection method.

Q. Can I use it with my smartphone?

Please check the specifications and user’s manual of each smartphone. If it can be used, please prepare a conversion adapter separately. To use with Apple products, please prepare the Apple Lightning Digital AV Adapter separately.

Q. Can I connect to a PC or game console?

Yes, it can be connected with the included HDMI cable.

Please click here for more FAQs. ‣
Product Support

DLP is registered trademark of Texas Instruments Incorporated.
IntelliBright is registered trademark of Texas Instruments Incorporated.
“PlayStation”and “PS5”, “PS4” are registered trademarks or trademarks of Sony Interactive Entertainment Inc.
HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Nintendo Switch is a trademark of Nintendo.
“Android”, ”Chromecast” and ”Google Play” are registered trademarks of Google LLC.
Apple, Apple TV® and iPhone are trademarks or registered trademarks of Apple Inc.
”Amazon” and “Amazon Fire TV stick” are trademarks of Amazon.com, Inc. or its affiliates.
“Wi-Fi®” and Miracast™ are trademarks or registered trademarks of Wi-Fi Alliance®.
MHL is trademark or registered trademarks of MHL, LLC.
Other system names and product names are generally registered trademarks or trademarks of each manufacturer.
Design and specifications are subject to change without notice.